- Joined
- Jul 10, 2008
- Messages
- 1,437
- Reaction score
- 44
- Points
- 48
- Age
- 37
- Location
- Akron Ohio
- Vehicle Year
- 90
- Make / Model
- F-250
- Engine Type
- V8
- Engine Size
- 351
- Transmission
- Manual
- 2WD / 4WD
- Solid Axle Swap 4x4
- Total Lift
- 6"
- Tire Size
- 44
I want to use 6.0L coils and use these brackets
http://ballisticfabrication.com/Flat-bottom-radius-arm-coil-mounts_p_1184.html.
However, I have not looked into this too deep yet. I know the drivers side leaf perch is cast to the pumpkin so I will have to work around that. I might have to set the coil seat pretty high meaning I would probably need to use my stock 2wd coils. I have to do some measuring. If it looks like it will take too long, I will just do a leaf setup for the time being.
http://ballisticfabrication.com/Flat-bottom-radius-arm-coil-mounts_p_1184.html.
However, I have not looked into this too deep yet. I know the drivers side leaf perch is cast to the pumpkin so I will have to work around that. I might have to set the coil seat pretty high meaning I would probably need to use my stock 2wd coils. I have to do some measuring. If it looks like it will take too long, I will just do a leaf setup for the time being.
Last edited: