tonyzz
New Member
- Joined
- Mar 10, 2018
- Messages
- 14
- Reaction score
- 0
- Points
- 0
- Age
- 54
My gauge mainly stays at cold, when driving the gauge will move a hair or 2 but not as it should. I have replaced the sending unit 2 times different units, and have the same issue. I did ground the single wire and the gauge moves to hot and over. I reconnected the wire and the gauge goes back to cold. The last sender I pulled some of the white tape off hoping to get it a better ground. Same issue, does anyone have any ideas.
Thanks
Sent from my Nexus 7 using Tapatalk
Thanks
Sent from my Nexus 7 using Tapatalk