Rex2nr
New Member
- Joined
- Aug 16, 2015
- Messages
- 79
- Reaction score
- 1
- Points
- 0
- Location
- Rochester, NY
- Vehicle Year
- 1999
- Make / Model
- Ford
- Engine Size
- 4.0
- Transmission
- Manual
Hey guys, Just got my 99 4.0 4x4 5spd with 4 wheel ABS running. I took it around the block for a first drive and limped back with a blown brake line- drivers front line rusted out. I've run new lines before but usually just get the preflared lenghts from the parts store. This will be my first time flaring and running all new lines.
I've read as many article and threads here and on other ranger/explorer forums as possible, but I still can't figure out ho many fittings I will need and what sizes and styles I'll need. Autozone's website doesn't even give great answers. I believe I'll need 3/16 line? What style fittings are on the ABS unit? To the rubber lines? The rear lines on the differential seem to have been replaced, so I will be stopping at the rubber lines.
Thanks!
I've read as many article and threads here and on other ranger/explorer forums as possible, but I still can't figure out ho many fittings I will need and what sizes and styles I'll need. Autozone's website doesn't even give great answers. I believe I'll need 3/16 line? What style fittings are on the ABS unit? To the rubber lines? The rear lines on the differential seem to have been replaced, so I will be stopping at the rubber lines.
Thanks!