My 44 Knuckle Swap 35/44 Hybrid

[97TrailRigDD]

It's real close .

 

[86 slo-vo]

i know the feeling, my rear line busted...no brakes all the way around

 

[97TrailRigDD]

Used the tech library to replace the front brake lines . This time I turned them out towards the tire .

 

[disciplerocks]

Should have gotten the one piece ones like I got.

 

[97TrailRigDD]

Which ones did you get and how long are they ?

 

[disciplerocks]

At the bottom of the tech library writeup:

These hoses are 26" long:

Raybestos: BH 38622, BH 38623

There are 2 numbers because there is a right and left side

http://www.autozone.com/autozone/parts/Brake-Hose-Front/_/N-8knp9?filterByKeyWord=BH+38622&fromString=search&fromType=oem

http://www.autozone.com/autozone/parts/Brake-Hose-Front/_/N-8knp9?filterByKeyWord=BH+38623&fromString=search&fromType=oem

 

[86 slo-vo]

the broken shaft sucks...so far so good with everything else though, it did good

 

[97TrailRigDD]

At the bottom of the tech library writeup:

These hoses are 26" long:

Raybestos: BH 38622, BH 38623

There are 2 numbers because there is a right and left side

http://www.autozone.com/autozone/parts/Brake-Hose-Front/_/N-8knp9?filterByKeyWord=BH+38622&fromString=search&fromType=oem

http://www.autozone.com/autozone/parts/Brake-Hose-Front/_/N-8knp9?filterByKeyWord=BH+38623&fromString=search&fromType=oem

Thanks Dustin

the broken shaft sucks...so far so good with everything else though, it did good

I forgot about that . Yeah first time out with the 44 stuff and it looks like it lost a cap off a joint . But that is my fault . I did all that work and didn't put in new joints , I just tack welded the caps on some used joints to the shafts . New 5-760x joints and full clips will be going in before next weekend .

 

[97TrailRigDD]

Found some Spicer 5-760x u-joints locally at a truck repair shop called CTC for $24.50 . Couldn't find them that cheap on the internet . The tech page said to use 1 3/16" clips but I couldn't find any , so I used 1 1/8" clips from Rural King .
Also went ahead and weld the caps , but just in one spot . I fixed the one I broke but I'll have to get more shafts before I can do the rest .

760 joints , full clips, and welded

 

[disciplerocks]

Wanna do mine next?

Lol looks good. Should hold ya for awhile.

 

[97TrailRigDD]

Your going to need them . I saw those tires you got .

 

[disciplerocks]

When you did your gears, did you do the c-clip elim. And if so what/where did you get the spring?

 

[97TrailRigDD]

When you did your gears, did you do the c-clip elim. And if so what/where did you get the spring?

Yes , got the spring at Four Seasons on Morgan .

 

[97TrailRigDD]

I used the same spring that is in the tech library .

http://www.therangerstation.com/tech_library/c-clip_eliminator_external.html

 

[disciplerocks]

Ok I see now thanks.