jasongind
New Member
- Joined
- Jan 4, 2008
- Messages
- 276
- Reaction score
- 1
- Points
- 0
- Age
- 42
- Location
- Parkland, WA
- Vehicle Year
- 2001
- Make / Model
- Ford
- Engine Size
- 3.0L
- Transmission
- Manual
Im not sure which one is the ground on the vehicles trailer connector. All 4 wires go up into the loom. I pulled the loom apart for about 4 feet yesterday and they were still goin back into it.You could always snip the covering back on the existing ground wire and run your own to it.
Edit: Well I guess if I would have thought about it the white is probably the ground on the vehicle side as well. I'll run a ground from the vehicle white to the frame and see if that works.
Last edited: