Recent content by MUDDING B-3000

Alright well ill give some background info on my truck so youll understand what im trying to do. 1992 ext cab ranger carb 302, C6 auto, fullwidth D44 n 9" with 488 gears, 36's 7" lift. Well the ministry of transportation is starting to crack down on vehicles around here in ontario, an always...

well i bought a whole 92 5L n 5spd 4x4 for my 92 ranger swapped it all in an now im getting to the clutch part n started reading that this is a big problem. The ranger master cylinder wont work n the f150 wont fit? so whats the solution to this without switching to another transmission?

well im looking to order my HEI distrubtor for my 302 swap whats the best place to get one from? Ive order tons of stuff from Bronco Graveyard an they have this one http://broncograveyard.com/bronco/i-18542-289-302-hei-distributor-black-cap.html Any other place online i should look at for a...

well i used the search couldnt find the exact answer, but heres my story i got a 92 ranger im swappin a 92 302, it was efi im going carb, now to hook up the fuel lines i read that i cant just toss a regulator into the feed line n im done i gotta do something with the return line? I was talking...

well im running a carb 302 in my 92 ranger how do i go about hookin the EFI stock fuel lines up to my carb set up? i know i need a fuel regulator but is there anyway to re use my steel braided lines that come factory in the truck? or do i have to cut them out n do something else?

Hi ive use the search button to figure out my problems but have been able to completely figure out my options. The motor i got is a 92 efi 302 from a f150 an im swaping it to carb ive already gotten a ford aluminum 4 barrel intake an holley 600 carb. I was told that i should go with a ford HEI...

i got a 92 ranger 5.5" EB coils ext RA's full width axles, soft 4" lift spring in the rear with shackles. i currently have old school skyjacker softride shocks up front, love them an i have doestech prerunners in the rear that are junk way to stiff for my truck. I looked in to the JD 70/30...

Alright well heres my problem i did the rear disk swap on my 92 ranger i got full width D44 9" i put the chevy 1/2ton disk brakes on the rear, bled everything with the truck off its all good no air, pedal firms up just before half way. But once i start the truck up a baby could push the brake...

well after a long time of searching i finaly found myself a wicked tow rig for a decent price. specs 1997 ford F350 4x4 xlt 7.3 powerstroke auto trans, manual shift t case re built tranny 2 yrs ago, all new breaks tires front end, only rust was a small hole in the DS cab corner.

well my low budget ranger build is finished, ended up breaking the D35 ttb driverside beam. So i went all out for the past month SAS D44 9" full widthing the truck to get it finished for this past thanksgiving weekend so i could go wheeling. Heres a couple teaser pics.

alright well i bought the Belltechs for my ranger an it sits higher in the back an the shackles have all the extra holes, now could i go up to the next hole in the shackle to lower the back a little bit? or would that just make the shackles not work as good? alright turns out i got 2 1\2 -3 "...

ok ya i kinda scared myself cuz i thought the hub housing came off the rotor so i just got a chizel an tapped between the two an it started coming apart but then i realized the lug nuts were splined into the housing an one lug nut fell out so i figured i broke it or something lol. but thanks...

alright well im new to the fullsize axles, but i bought a FW D44 an 9" for my ranger. an ive striped the 9" but im trying to get the hubs off the 44, i got the internal locking part out but is the hub housing suppost to be attached to the rotor? or should it seperate? i still have the spindle...

heres mine from may 24, ranger is in the background.

well i gota 92 ranger xt cab SB, 6" SJ lift 3" body, an 36" iroks an well i know there not balanced i cant find a place with a bubble balancer. an i bought the tires off my cousing who had them on a Fullsize bronco an he said it had abit of a shake to them. but my truck shakes bad when u hit 70...