Hey guys, Ive been "done" with my 302 swap in my 87 ranger for about 3 months now and have run into my first problem. At the moment, my in-line fuel pressure gauge is reading the normal 6 psi but the sight glass/filter is not filling all the way full with fuel. Its almost like I have fuel...
Hey guys, ive been working out all the little kinks in my 302 swap for awhile now and seem to be stuck on this one.
2 Problems: 1) I have a ZF behind it and when ever I shift into 3 and it is at a real low rpm i get a bad hiccup and studder. Im thinking this could be a timing or carb problem...
Hey guys, Ive had my 302 running for awhile now but just got it road ready with the SAS swap. Currently im running a Holley 600 4160 4 barrel and a Mr. Gasket 12s with regulator. During road testing itl run fine for about 4 or 5 minutes, then all of a sudden it will not have enough power to...
So im on the last leg of my SAS on my 87 ranger. This D44 is off a 79 f100 I found in the junkyard and im in a bind on what to do with the drag link. The TRE off the d44 is too big for the ranger pitman arm and ive read its pretty common to ream it out to fit. I was wondering wouldnt it just be...
Hey guys, Im currently at the end of my 302 sas ranger and am at my last problem. I have a zf 5 speed behind my 302 and I cant get the slave to hold fluid. I read up that certain clutch lines have o rings that arent big enough for the slave. So I went to take the clutch line off to put a bigger...
Hey guys, Ive been working on my 302 for awhile now and haven't had much time to work on it because of classes. But today I went to start it up and it seems like there is some sort of binding while it is turning. At first i thought it was the starter because it popped when i first started...
Hey guys, im in the middle of swapping a 302 out of a 88 town car into my 87 ranger. Im also in the middle of a SAS so i got the truck in pieces. I bought the motor off a guy that was in th middle of rebuilding it but ran out of money. I got it for a really good price but the only bad thing is I...
Hey guys, im getting ready to order the parts I need to finish my SAS and I want to order parts just once. When I had my 2wd on I had 18" long coils (4" lift) and 33" tires, and with my sas i want to be able to fit 35" tires. So for coil springs would some 20" EB coils like these...
I was just thinkin if you move your perches and radius arms to center the axle up then the differential wouldnt line up properly with the transfer case. Maybe im just looking at it totally wrong.
I was just wondering how much of a hassle 3/4 ton axles are cuz i could find some nice 8 lug wheels like nothing but as for 5on5.5 I cant find any used on craigslist in my area. Im on a budget if you cant tell
Hey guys, ive acquired the money for my 2wd to sas swap now im just deciding on an axle. Im goin to a local pull-a-part next saturday and they have tons of f150s and 250 that im gonna pull the entire driveline from. 8 lug wheels are so easy to find for trucks compared to the 5 on 5.5. I really...
The long debate of leaf vs coil sas has come into my hands now. I have a 87 2WD that im going to be sas'in in about 3 weeks. This truck is mostly a farm truck but is also my dd and some mild off road. I can weld and fabricate so either should be very possible. I am shooting for simple and...
I was wondering around how much a dragster style exhaust for my truck is gonna run. I want 3" pipes and what them to shine. I guess chrome plated or stainless steel pipes would be the best. Opinions...
I know some people think the 4x4 conversion is plain stupid, and you should just buy a factory 4x4, but my dad bought my truck brand new in 87 and its somewhat of a family jewel. I orginally started working on this truck just because it was free and I was broke, now ive sunk a good amount of...
Hello all, its been about 6 months of research and saving now and I think ive got enough money to get the swap under way. My truck is a 87 supercab 2.9 2wd and I plan on going carbed. I dont have a real plan for what engine im going to get, just all depends on what is at the pull apart in...
I put on my 4in 2wd suspension lift about 2 months ago. I bought a steering stabilizer with it and it mounts to the frame by a short piece of metal. I was wondering if anyone has fabricated a different way of mounting a stabilizer on 2wd trucks or even a way to get duals on there. I have never...
Hey guys, about 6 or 7 weeks ago I found a thread on the Parts for Sale forum for a visor and brush guard. I contacted cperna15 about the visor and we worked out $80 for the item and shipping. I sent the money and he said he shipped it but nothing so far. I asked for a tracking number weeks ago...
I have a 87 2wd Ranger. Ive lifted it 4" suspension already and the brake lines are already snug. I have 33x12.5x16 on it right now and i just barely have enough clearance, so i plan on either doing 2" of suspension or a 3" body lift. Ive looked through TRS and couldn't find an article actually...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.